استاندارد عیدی سال 95

ای صبح فرح افزا نوروز مبارک باد

ای نکهت شادی زا نوروز مبارک باد

ای خوب و ای یکتا، نوروز مبارک باد

ای شوق و سرور ما نوروز مبارک باد

سال نو مبارک

تمامی همکاران سایت دانشنامه تخصصی مهندسی ایران نوروز 1395 را تبریک گفته و آرزو داریم این سال، مایه برکت، موفقیت برای تمامی هموطنان عزیز بوده و در کنار خانواده لحظات خوبی را داشته باشید.

بنابر رسم دیرین، تصمیم بر آن گرفته شد امسال نیز عیدی خدمت کاربران عزیز تقدیم نماییم. چندین عیدی برای شما کاربران گرامی در نظر گرفته شده است.

1- ارائه استاندارد بصورت رایگان

جهت دریافت استاندارد کافیست تنها تنها کد آن را در قسمت نظرات کاربران پایین این صحفه درج نمایید تا برای شما ارسال شود.

2- فروش محصولات قرار داده شده در سایت با 40 درصد تخفیف

3– ارائه پکیج استانداردهای منتخب و بروز در همین پست بصورت رایگان

پست بروزرسانی می شود و استانداردهای جدید قرار می گیرد.

4- فروش ویژه پکیج های استانداردهای جدید و کمیاب با قیمت بسیار پایین

موارد ذکر شده تنها در ایام عید ارائه می گردد و بعد از آن، با قیمت واقعی ارائه می شود.

——————————————————–

آپدیت 2 فروردین:

استاندارد ASTM 2015 – Volume 01.01 Steel – Piping, Tubing, Fittings

لیست کامل:

A1012-10 Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins.
A1012-10(2015) Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins.
A1020A1020M-02(2012) Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
A1065A1065M-15 Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
A1082A1082M-15 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
A182A182M-15 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A193A193M-15 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
A194A194M-15 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A333A333M-13 Standard Specification for Seamless and Welded Steel Pipe for Low- Temperature Service and Other Applications with Required Notch Toughness
A358A358M-14a Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A358A358M-15 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A522A522M-14 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A694A694M-14 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A774A774M-14 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A847A847M-14 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A865A865M-06(2012) Standard Specification for Threaded Couplings, Steel, Black or Zinc- Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
A988 A988M-15 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

دانلود با لینک مستقیم

پسورد: engpedia.ir

منبع: دانشنامه تخصصی مهندسی ایران (EngPedia.ir)

————————————————————

استاندارد ASTM 2015 – Volume 01.02 Ferrous Castings; Ferroalloys

لیست کامل:

A1045-10(2014) Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems
A1056-12 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
A1080-15 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
A216A216M-14e1 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A217A217M-14 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A278A278M-01(2011) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
A297A297M-14 Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium- Nickel, Heat Resistant, for General Application
A319-71(2011) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non- Pressure Containing Parts
A338-84(2014) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
A352A352M-06(2012) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A356A356M-11 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
A389A389M-13 Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
A395A395M-99(2014) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A426A426M-13 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High- Temperature Service
A447A447M-11 Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
A451A451M-14 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High- Temperature Service
A488A488M-12 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
A571A571M-01(2011) Standard Specification for Austenitic Ductile Iron Castings for Pressure- Containing Parts Suitable for Low-Temperature Service
A608A608M-14 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
A609A609M-12 Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A660A660M-11 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High- Temperature Service
A667A667M-87(2012) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
A674-10(2014) Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A703A703M-15 Standard Specification for Steel Castings, General Requirements, for Pressure- Containing Parts
A732A732M-14 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
A743A743M-13ae1 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A744A744M-13 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A748A748M-87(2012) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
A757A757M-10 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A757A757M-15 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure- Containing and Other Applications, for Low-Temperature Service
A781A781M-14b Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A799A799M-10 Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
A800A800M-14 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
A802A802M-95(2010)e1 Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A834-95(2011) Standard Specification for Common Requirements for Iron Castings for General Industrial Use
A872A872M-14 Standard Specification for Centrifugally Cast Ferritic Austenitic Stainless Steel Pipe for Corrosive Environments
A874A874M-98(2014) Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
A888-13a Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
A890A890M-13 Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic Ferritic) for General Application
A903A903M-99(2012) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A915A915M-08(2013) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
A942A942M-95(2012)e1 Standard Specification for Centrifugally Cast White Iron-Gray Iron Dual Metal Abrasion-Resistant Roll Shells
A957A957M-15 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A958A958M-14 Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
A985A985M-14 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
A990A990M-14a Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
A995A995M-13 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
A997-08(2012) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
ASTM 2015 – Volume 01.02 Full-[EngPedia.ir].rar
C1173-10(2014) Standard Specification for Flexible Transition Couplings for Underground Piping Systems
C1277-15 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1440-08(2013)e1 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
C1460-12 Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground
C1461-08(2013) Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use
C1540-15 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1541-12 Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings
C1563-08(2013) Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications

دانلود با لینک مستقیم

پسورد: engpedia.ir

منبع: دانشنامه تخصصی مهندسی ایران (EngPedia.ir)

————————————————————

ارائه استاندارد AWS A Series 2015

لیست کامل:

AWS A1.1-2001(Spanish), AWS A1.1-2001, AWS A10.1M-2007, AWS A2.4-1993(Spainol), AWS A2.4-2007, AWS A2.4-2012, AWS A3.0-94, AWS A3.0M_A3.0-2010, AWS A4.2M-2006, AWS A4.5_A4.5M-2012, AWS A5.01M_A5.01-2008, AWS A5.01M_A5.01M-2013, AWS A5.02_A5.02M-2007, AWS A5.1_A5.1M-2004-09, AWS A5.1_A5.1M-2012, AWS A5.10_A5.10M-1999 (R2007), AWS A5.10_A5.10M-2012, AWS A5.11_A5.11M-2010, AWS A5.12-2009-erratum, AWS A5.12-98, AWS A5.12M_A5.12-2009, AWS A5.13_A5.13M-2010, AWS A5.13-2000, AWS A5.14_A5.14M-2009, AWS A5.14_A5.14M-2011, AWS A5.15-1990 (R2006), AWS A5.16_A5.16M-2007, AWS A5.16_A5.16M-2013-02, AWS A5.17_A5.17M-1997, AWS A5.17_A5.17M-97 (R2007), AWS A5.18_A5.18M-2005, AWS A5.18-93, AWS A5.19-1992 (R2006), AWS A5.1M_A5.1-2004, AWS A5.2_A5.2M-2007, AWS A5.20_A5.20M-2005, AWS A5.21_A5.21M-2011, AWS A5.22_A5.22M-2010, AWS A5.22_A5.22M-2012, AWS A5.22-1995(R2005), AWS A5.23_A5.23M-2007, AWS A5.23_A5.23M-2011, AWS A5.24_A5.24M-2005, AWS A5.25_A5.25M-97R, AWS A5.26_A5.26M-1997 (R2009), AWS A5.28_A5.28M-2005, AWS A5.28-1996, AWS A5.29_A5.29M-2005, AWS A5.29_A5.29M-2010, AWS A5.3_A5.3M-1999 (R2007), AWS A5.30_A5.30M-2007, AWS A5.31-92R, AWS A5.31M_A5.31-2012, AWS A5.32_A5.32M-1997 (R2007), AWS A5.32M_A5.32-2011, AWS A5.34_A5.34M-2007, AWS A5.34_A5.34M-2013, AWS A5.36_A5.36M-2012, AWS A5.4_A5.4M-2006, AWS A5.4_A5.4M-2012, AWS A5.5_A5.5M__2014, AWS A5.5_A5.5M-2006, AWS A5.6_A5.6M-2008, AWS A5.7_A5.7M-2007, AWS A5.8M_A5.8 2011 AMD 1-2013-01, AWS A5.8M_A5.8-2011, AWS A5.9_A5.9M-2012, AWS A9.5-2013-10, AWS API-M-2006, AWS API-M-2008.

مجموعا 71 استاندارد

————————————————————

ارائه استاندارد AWS D Series 2015

لیست کامل:

ANSI AWS D11.2-89(R2006), AWS D1.1 CCRM-2010, AWS D1.2_D1.2M Errata__2014, AWS D1.2_D1.2M Errata-2014, AWS D1.2_D1.2M__2014, AWS D1.2_D1.2M-2003 Structural Welding Code—Aluminum, AWS D1.2_D1.2M-2008, AWS D1.2_D1.2M-2014, AWS D1.3_D1.3M-2008, AWS D1.4_D1.4M-2005, AWS D1.4_D1.4M-2011, AWS D1.4-1992, AWS D1.5M_D1.5-2010, AWS D1.7_D1.7M-2010, AWS D1.8-D1.8M-2009-05, AWS D1.9_D1.9M 2007 ADD 1-2011, AWS D10.10_D10.10M-1999(R2009) Recommended Practices for Local Heating of Welds in Piping and Tubing, AWS D10.11M_D10.11-2007, AWS D10.14M_D10.14-2010, AWS D10.18M_D10.18-2008, AWS D10.4-1986, AWS D10.7M_D10.7-2008, AWS D14.1_D14.1M-2005 welding of cranes, AWS D14.1_D14.1M-2005, AWS D14.3_D14.3M-2010, AWS D14.4_D14.4M-2012, AWS D14.5_D14.5M-2009, AWS D14.6_D14.6M-2012, AWS D14.7-2005, AWS D14.8M-2009, AWS D14.9_D14.9M-2013, AWS D15.1 ERRATA SHEET, AWS D15.1_D15.1M 2007 ERRATA SHEET, AWS D15.1_D15.1M-2007, AWS D15.1_D15.1M-2012, AWS D15.2 ERRATA SHEET-2003, AWS D15.2_D15.2M-2013, AWS D16.1M_D16.1-2004, AWS D16.2M_D16.2-2007, AWS D16.3M_16.3-2009, AWS D16.4-2005, AWS D17.1_D17.1M-2010(Spanish), AWS D17.1_D17.1M-2010, AWS D17.1-2000, AWS D17.1-2001, AWS D17.2_D17.2M-2007, AWS D17.2_D17.2M-2013, AWS D17.3_D17.3M-2010, AWS D18.1_D18.1M-2009, AWS D18.1-1999, AWS D18.2-2009, AWS D18.3_D18.3M-2005, AWS D3.7-2004, AWS D3.9-2010, AWS D8.14M-2008, AWS D8.1M-2007, AWS D8.6-2005, AWS D8.7M-2005, AWS D8.8M__2014, AWS D8.8M-2007, AWS D8.9M-2012, AWS D9.1_D9.1M-2006, AWS D9.1-90_ Sheet Metal Welding Cod, AWS D9.1M_D9.1-2012.

مجموعا 64 استاندارد

————————————————————

ارائه استاندارد JIS

لیست کامل:

EIAJ ED 4702:1992 (EN), JASO B001:1997 (EN), JASO B002:1989 (EN), JASO B101:1983 (EN), JASO B102:1987 (EN), JASO B106:1985 (EN), JASO B204:1981 (EN), JASO B301:1989 (EN), JASO B402:1989 (EN), JASO B404:1993 (EN), JASO B407:1987 (EN), JASO B409:1982 (EN), JASO B411:1988 (EN), JASO B801:1986 (EN), JASO B802:1988 (EN), JASO B803:1995 (EN), JASO C101:1989 (EN), JASO C102:1989 (EN), JASO C103:1995 (EN), JASO C104:1995 (EN), JASO C204:1986 (EN), JASO C205:1991 (EN), JASO C206:1993 (EN), JASO C303:1986 (EN), JASO C402:1999 (EN), JASO C406:2000 (EN), JASO C428:2001 (EN), JASO C615:1989 (EN), JASO C712:1982 (EN), JASO D607:1999 (EN), JASO D612:1997 (EN), JASO E109:1994 (EN), JASO F109:1991 (EN), JASO T203:1985 (EN), JEITA ET:7409-103:2008 (EN), JEITA ET:7409-104:2008 (EN), JEITA ET:7409-201:2008 (EN), JIS A 0001:1963 (EN), JIS A 0003:1963 (EN), JIS A 0017:1992 (EN), JIS A 0018:1992 (EN), JIS A 0030:1973 (EN), JIS A 0203:1980 (EN), JIS A 1460:2001 (EN), JIS A 5526:1994 (EN), JIS A 5528:1988 (EN), JIS A 5759:1988 (EN), JIS A 5908:2003 (EN), JIS B 0121:1988 (EN), JIS B 0202:1982 (EN), JIS B 0203:1966 (EN), JIS B 0203:1982 (EN), JIS B 0205:1982 (EN), JIS B 0207:1982 (EN), JIS B 0216:1987 (EN), JIS B 1101:1996 (EN), JIS B 1111:1996 (EN), JIS B 1176:1988 (EN), JIS B 1177:1997 (EN), JIS B 1180:1994 (EN), JIS B 1181:1993 (EN), JIS B 1251:1995 (EN), JIS B 1301:1996 (EN), JIS B 1351:1987 (EN), JIS B 1352:1988 (EN), JIS B 1354:1988 (EN), JIS B 1601:1996 (EN), JIS B 1602:1961 (EN), JIS B 1701:1973 (EN), JIS B 1722:1974 (EN), JIS B 1752:1989 (EN), JIS B 2003:1994 (EN), JIS B 2220:2004 (EN), JIS B 2240:1984 (EN), JIS B 2351:1990 (EN), JIS B 2352:1994 (EN), JIS B 2354:1991 (EN), JIS B 4637:1994 (EN), JIS B 4706:1966 (EN), JIS B 4805:1989 (EN), JIS C 0950:2005 (EN), JIS C 8303:1993 (EN), JIS D 0401:2000 (EN), JIS D 0401:2006 (EN) A1, JIS D 9401:2005 (EN), JIS E 1101:1993 (EN), JIS G 0307:1998 (EN), JIS G 0555:2003 (EN), JIS G 0566:1966 (EN), JIS G 0801:1993 (EN), JIS G 3101:2004 (EN), JIS G 3106:1995 (EN), JIS G 3112:1987 (EN), JIS G 3115:1990 (EN), JIS G 3118:1987 (EN), JIS G 3119:1987 (EN), JIS G 3120:1987 (EN), JIS G 3127:1990 (EN), JIS G 3127:2005 (EN), JIS G 3131:2005 (EN), JIS G 3202:1988 (EN), JIS G 3203:1988 (EN), JIS G 3204:1988 (EN), JIS G 3214:1991 (EN), JIS G 3222:1988 (EN), JIS G 3311:1998 (EN), JIS G 3318:2008 (EN), JIS G 3351:1987 (EN), JIS G 3352:1979 (EN), JIS G 3353:1990 (EN), JIS G 3444:1994 (EN), JIS G 3445:1988 (EN), JIS G 3452:1988 (EN), JIS G 3454:1988 (EN), JIS G 3455:1988 (EN), JIS G 3456:1988 (EN), JIS G 3457:1988 (EN), JIS G 3461:1988 (EN), JIS G 3463:1994 (EN), JIS G 3464:1988 (EN), JIS G 3502:1996 (EN), JIS G 3505:1973 (EN), JIS G 3506:1980 (EN), JIS G 3507:194X (EN), JIS G 3507-2:2005 (EN), JIS G 3521:1988 (EN), JIS G 3522:1957 (EN), JIS G 3522:1991 (EN), JIS G 3525:1973 (EN), JIS G 3532:1962 (EN), JIS G 3532:1993 (EN), JIS G 3536:1971 (EN), JIS G 3537:1972 (EN), JIS G 3538:1971 (EN), JIS G 3539:1974 (EN), JIS G 3539:1976 (EN), JIS G 3552:1984 (EN), JIS G 3560:1988 (EN), JIS G 3565:1988 (EN), JIS G 4053:2003 (EN), JIS G 4102:1979 (EN), JIS G 4103:1979 (EN), JIS G 4105:1979 (EN), JIS G 4109:1987 (EN), JIS G 4312:1991 (EN), JIS G 4313:1988 (EN), JIS G 4401:1972 (EN), JIS G 4401:1983 (EN), JIS G 4801:1984 (EN), JIS G 4805:1990 (EN), JIS G 5501:1995 (EN), JIS H 0404:1988 (EN), JIS H 3250:1992 (EN), JIS H 5101:1988 (EN), JIS H 5102:1988 (EN), JIS H 5111:1988 (EN), JIS H 5113:1988 (EN), JIS H 5114:1988 (EN), JIS H 5115:1988 (EN), JIS H 5401:1958 (EN), JIS H 8617:1991 (EN), JIS H 8641:1999 (EN), JIS H 8684:1997 (EN), JIS K 1570:2004 (EN), JIS K 1571:2004 (EN), JIS K 2238:1993 (EN), JIS K 6251:2010 (EN), JIS K 6770:1991 (EN), JIS L 0843:2006 (EN), JIS L 0854:2001 (EN), JIS L 0860:1996 (EN), JIS L 1092:1998 (EN), JIS L 1099:1985 (EN), JIS L 1099:2006 (EN), JIS L 1903:1998 (EN), JIS M 7653:1987 (EN), JIS S 6005:2000 (EN), JIS Z 2248:2006 (EN), JIS Z 2254:1996 (EN), JIS Z 2371:2000 (EN), JIS Z 2801:2000 (EN), JIS Z 3060:2002 (EN), JIS Z 3104:1995 (EN), JIS Z 3198-1:2003 (EN), JIS Z 3198-2:2003 (EN), JIS Z 3198-3:2003 (EN), JIS Z 3198-4:2003 (EN), JIS Z 3198-5:2003 (EN), JIS Z 3198-6:2003 (EN), JIS Z 3198-7:2003 (EN), JIS Z 3202:1999 (EN), JIS Z 3262:1998 (EN), JIS Z 8901:2001 (EN).

مجموعا 193 استاندارد

————————————————————

استاندار NACE 2015 با بیش از 550 فایل و بروز شده

————————————————————

استاندار NFPA با بیش از 50 فایل و بروز شده

————————————————————

استاندار SAE با بیش از 90 فایل و بروز شده

————————————————————

استاندار SSPC با بیش از 170 فایل و بروز شده

———————————————————–

دسترسی به نرم افزارهای VIP فقط در کانال:

    EngPedia_ir@